DRV632PWR.pdf
Unit Price:$0.610000
Ext Price:$0.610000


The DRV632PWR is a high-performance stereo headphone amplifier developed by Texas Instruments for portable and battery-powered audio applications. It integrates two high-current output channels capable of driving low-impedance headphone and speaker loads with very low total harmonic distortion and noise (THD+N).
Based on a fully differential amplifier topology, the DRV632PWR eliminates the need for large output coupling capacitors and provides excellent common-mode noise rejection. This architecture helps improve audio fidelity, reduce PCB area and simplify system design, especially in compact consumer electronics.
Operating from a single supply voltage as low as 3 V, the device achieves an optimal balance between output power and efficiency. Its low quiescent current and wide bandwidth make it suitable for smartphones, tablets, portable media players and other audio-enabled embedded systems.
The DRV632PWR delivers low distortion performance with a typical THD+N of 0.002% at 1 kHz. This ensures clean audio reproduction across the audible frequency range, even when driving low-impedance loads.
Differential outputs provide improved noise immunity and eliminate output DC blocking capacitors. This reduces component count, lowers system cost and improves signal integrity in noisy environments.
With a typical quiescent current of only 14 mA, the device supports extended battery life while maintaining strong output drive capability for headphones and small speakers.
The TSSOP-8 package enables compact PCB layouts and easy integration into space-constrained consumer and portable electronics designs.
A small-signal bandwidth of up to 8 MHz ensures accurate transient response and minimal phase distortion, preserving audio detail and clarity.
A typical slew rate of 4.5 V/µs allows the amplifier to handle fast signal changes without audible distortion or signal compression.
The DRV632PWR is designed to operate reliably over a wide temperature range from −40 °C to +85 °C, supporting consumer and automotive cabin environments.
| Parameter | Value / Condition |
|---|---|
| Number of Channels | 2 (Stereo) |
| Supply Voltage Range | 3 V – 3.6 V |
| Quiescent Current | 14 mA (typ.) |
| THD + N (1 kHz) | 0.002% (typ.) |
| Small-Signal Bandwidth | 8 MHz (typ.) |
| Slew Rate | 4.5 V/µs (typ.) |
| Operating Temperature | −40 °C to +85 °C |
| Package | TSSOP-8 (PWR) |
| Base Product Number | DRV632 |
Alternative stereo headphone amplifiers with similar performance characteristics include:
When selecting an alternative, designers should evaluate output power capability, distortion performance, supply voltage compatibility and output topology.
Texas Instruments is a global leader in analog and embedded semiconductor solutions. The company offers a comprehensive portfolio of audio amplifiers, power management ICs and signal conditioning devices for consumer, industrial and automotive markets.
TI audio products are widely used due to their long product lifecycle, strong technical documentation and consistent manufacturing quality.
Enhances audio output quality for wired headphones and auxiliary speakers in mobile devices.
Provides clean, low-noise audio amplification in compact, battery-powered entertainment devices.
Used in auxiliary audio paths and cabin entertainment systems requiring stable performance over temperature.
Suitable for embedded platforms requiring simple, high-quality stereo audio output with minimal components.
We currently provide peer-to-peer order processing. Submit an RFQ for DRV632PWR, and our professional agent will contact you with competitive global pricing and guide you to complete the order once you accept the offer.
Our experienced QC team strictly verifies and tests DRV632PWR. Only qualified suppliers who pass our audit can list DRV632PWR on OEM STOCK GLOBAL LIMITED. We pay close attention to sourcing channels and product quality so you can purchase with confidence.
Pricing and inventory for DRV632PWR fluctuate and are updated periodically (typically within 24 hours). Quotations generally remain valid for 5 days unless otherwise stated.
Wire Transfer, PayPal, Alipay, WeChat Pay, Credit Card, Western Union, MoneyGram, and Escrow are supported. Note: Some payment methods may incur a handling fee.
We support DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is available. After dispatch, you will receive an email with tracking information. Note: Carriers may take up to 24 hours to show tracking events. Typical transit time: 3–5 days by express; 25–60 days by registered mail.
We perform Pre-Shipment Inspection (PSI) on randomly selected units before shipping. If there is an issue with DRV632PWR, returns/replacements are accepted when:
Steps: (1) Inform us within 90 days; (2) Obtain Return Authorization (RMA) before sending items back.
Please contact us for technical documents and support related to Texas Instruments DRV632PWR, including pin diagrams and datasheets. Our team will respond promptly.






The following parts are popular search parts "DRV632PWR" in Audio Special Purpose.

Directly Purchase Of Excess Inventory
We source and manage supply to safeguard against disruption from end-of-life

Electronic Component Consignment
We optimize supply chain operations by overseeing inventory, managing excess stock

Electronic Component Sourcing
Global sourcing, quality assurance, and fast turnaround you can rely on.

Electronic Component Quality Control
With rigorous process to intercept fake goods, with sincere service to deliver trust.
| 1+ | $0.610000 | $0.610000 |
| 10+ | $0.428000 | $4.280000 |
| 25+ | $0.383600 | $9.590000 |
| 100+ | $0.334800 | $33.480000 |
| 250+ | $0.311440 | $77.860000 |
| 500+ | $0.297340 | $148.670000 |
| 1000+ | $0.285730 | $285.730000 |

onsemi

Analog Devices Inc.

Texas Instruments

Texas Instruments

Texas Instruments

Texas Instruments

Texas Instruments

onsemi

Texas Instruments

Skyworks Solutions Inc.

Cirrus Logic Inc.

Texas Instruments

Texas Instruments

Nisshinbo Micro Devices Inc.

Texas Instruments

Texas Instruments